Diy Linear slides

Finally back from a 3 month or longer break from the Reprap, stupid bootloader problems.... but I'm back with a vengeance!
Here are my slides for the X & Y axes

Heres a semi-tutorial/walk through for converting drawer slides to linear slides for a Repstrap
All the materials I used:
- Very large C-clamp
- Small glass or jar
- Screwdriver
-3/4 extension drawer slide
First what you have to do is take off the plastic stops on each side of the slide, one side you could easily pull off the stop but the other side I had to use a screwdriver to pry the stop off

Then I slid off the moving slide with the whole mechanism into a jar as to not lose any of the bearings

Now with the slide off I used the C-clamp to press down the metal tab that stops the slide so there is more space for the slide to move

With the stop down it is time to put the slide w/ bearings back into the 1st part of the slide, this is tricky because the bearings do not like to stay in the holding places they are supposed to be in so I would put them in one row at a time and slide to the next row

When you manage to get all the bearings in place you will have a working slide mechanism, although in order for it to actually move something you'll have to mount a mounting plate with some bolts on the sliding part and make a stop at the open end of the slide.

Now to make the frame for the Wolfstrap out of MDF!